Description

ANENG ST209 6000countsFull Intelligent Automatic Range Digital Current Multimeter(AUTO)

Feature:

1-1. Display: liquid crystal display (LCD);

1-2. Maximum display: 5999 (3 5/6) bit automatic polarity display;

1-3. Measurement method: double integral A/D conversion;

1-4. Sampling rate: about 3 times per second;

1-5. Overrange display: The highest position shows”OL”;

1-6. Low voltage display:”Low voltage symbol “symbol appears;

1-7. Working environment:(0~40)°,relative humidity<80%;

1-8. Power: 2 XAAA 1.5V battery(not incluida);

Function:

DC voltage DCV	Yes	AC voltage ACV	Yes
DC current DCA	Yes	AC current ACA	Yes
Resistor / Diode / On-Off Test / Capacitor	Yes	Frequency F	Yes
Square wave output	Yes	NCV	Yes
Zero line /Fire line test	–	Full unit symbol	Yes
Backlight manual/Auto off	Yes	True RMS measurement	Yes
Temperature(°/°)	Yes	Flashlight lighting	Yes

	Range	Accuracy	Resolution
DC voltage	6V/60V/600V	±(0.8%+10)	0.001V/ 0.01V/0.1V
DC voltage	1000V	±(0.5%+3)	1V
AC voltage	6V/60V/600V	±(0.8%+3)	0.001V/ 0.01V/0.1V
AC voltage	750V	±(1.2%+10)	1V
DC current	60A/600A	±(2.5%+30)	0.01A/0.1A
AC current	60A/600A	±(2.5%+30)	0.01A/0.1A
Resistance (omh)	600	±(0.8%+5)	0.1
Resistance (omh)	6K/60K/600K/6M	±(0.8%+3)	1/10/100/1k
Resistance (omh)	40M	±(2.5%+3)	10k
Capacitance (C)	60nF/600nF/6uF/60uF/600uF	±(3.5%+20)	10pF/100pF/1nF /10nF/100nF
Capacitance (C)	6mF/30mF	±(5%+3)	1uF/10uF
Frequency	10Hz/100Hz/1kHz/10kHz/ 100kHz/1MHz/10MHz	±(0.1%+3)	0.01Hz/0.1Hz/1Hz/10Hz /100Hz/1kHz/10kHz
Temperature	(-20-1000℃)		1℃
	(0-1832℉)		1℉

Package List:

1 X ST209 Clamp Meter(without battery)

2 X Test Lead

1 X Temperature Lead

1 X User Manual

1 X Storage Bag

NOTE:

This series of instruments is designed in accordance with IEC1010 (Safety Standards promulgated by the International Electrotechnical Commission), please read the safety precautions before use.

1. When measuring voltage, please do not input the limit voltage exceeding the effective value of DC 1000V or AC 750V;

2.The voltage below 2.36V is a safe voltage. When measuring higher than 36V DC and 25V AC voltage, check whether the test leads are in reliable contact, are connected correctly, and are well insulated to avoid electric shock;

3. When changing functions and ranges, the test leads should leave the test point.